NeoGuard Door / Window Door & Window Contact

The NeoGuard Door/Window is attached to doors or windows and registers every door or window opening. When the sensor is triggered, an SMS notification is sent directly to your smartphone and the alarm goes off.

The NeoGuard Door/Window is a door or window contact that is used to register door/window openings and inform you about them. This means that no one can sneak into your house unnoticed through doors and windows. Depending on the system's alarm mode and the alarm rule set, the NeoGuard control panel receives signals from the NeoGuard Door/Window every time a door/window is opened and triggers an alarm if necessary. You will be notified of this immediately by SMS and voice call to your smartphone. The door/window contact also has the entrance bell function, so that every door/window opening, for example, is announced with an acoustic signal without necessarily triggering an alarm. Installation is very quick and easy, just scan the sensor's QR code using the NeoGuard smartphone app, stick the sensor in the right place and you're done! Technical data:
Operating voltage 1.5V DC
Battery 1 x AAA battery (1.5V)
Operating current 55~65mA
Power consumption in standby 9.5µA~11µA
Transmission distance
100m (obstacle-free area)
40-50m (indoors)
Transmission frequency 433.29MHz
Operating temperature -10°C~40°C
Relative humidity 90%rh (non-condensing)
Weight 35.5g (without battery)
46.7g (with battery)
Dimensions transmitter (HxWxD) 80 x 38 x 13 mm
Dimensions magnet (HxWxD) 80 x 14 x 12.9 mm

Scope of delivery:
1x NeoGuard Door/Window (1 x transmitter + 1 x magnet)
1x battery
2x adhesive strips

Only in conjunction with NeoGuard 3G One Smart Home Alarm System Starter Set usable