No results were found for the filter!
Here you will find a very small 3-way distributor that can be installed in a flush-mounted box. The passage area is designed for the entire BK, radio, and satellite area. This allows you to cover all areas with 1 distributor. With this...
Here you will find a very small 4-way distributor that can be installed in a flush-mounted box. The passage area is designed for the entire BK, radio, and satellite area. This allows you to cover all areas with 1 distributor. With this...
Satellite distributor 3-fold 5-2450 MHz - digitally compatible (100dB) Distributors for satellite and cable systems F coupling > 3x F coupling - 100dB shielding for digital signals - DC continuity on all connectors Distribution loss at...
The 6-way distributor is made of high-quality distributor material Low transmission loss High-quality distributor material Shielding factor: 100dB return channel suitable Solid die-cast zinc body The rear part soldered, therefore high...
The Unicable two-way splitter enables the two-way distribution of DC and HF signals. In addition, it transmits commands from the set-top boxes to the LNB and from the LNB to the set-top box. These high-quality splitters have an insertion...
Sat distributor 2-Way 5 MHz - 2450 MHz - Digital-Compatible (100dB) Features - F-Couplings - 100 dB Shielding for Digital Signals - DC Continuity at all Connections - Distribution Loss at 1750 MHz: 7.5 dB - Return Loss at 1750 MHz: 14 dB...
This process switch enables you to connect two satellite receivers to a coaxial line simply by mounting it; this is also referred to as a master/digital and a slave/analog connection. The first receiver is connected to the so-called...
Satellite distributor 4-fold 5-2450 MHz - digitally compatible (100dB) Distributors for satellite and cable systems F coupling > 4x F coupling - 100dB shielding for digital signals - DC continuity on all connectors Distribution loss at...
Power Amplifier Distribution Amplifier 1x Input, 2x Output 2x 15 dB Amplification A BK (broadband cable) -based two-way amplifier is simply interposed in the existing antenna system and offers at the output the connection possibility for...
Here you will find a very small 2-way distributor that can be installed in a flush-mounted box. The passage area is designed for the entire BK, radio and satellite area. This allows you to cover all areas with 1 distributor. With this...
High quality distributor material Frequency range: 5 - 2500 MHz with DC passage. Shielding: 100 dB High degree of shielding >100 dB thanks to the completely soldered housing DC diode decoupled return channel suitable Solid die-cast zinc...
Sluice gate for merging satellite and terrestrial DVB-T / T2 or cable DVB-C signal to the TV system. Input 1: 950-2400MHz Input 2: 0.15-860MHz 100dB (digitally capable) Technical specifications: Length 58.6 mm Width 51.5 mm Height 15.3 mm