Inverto Pro Wideband LNB with Horizontal/Vertical for Unicable 2

Specially designed to meet the increasing demand from DTH providers for cost-effective MDU and multi-tuner home gateway installations. This high-quality LNB is based on a single 10.4GHz oscillator and shows excellent RF performance over the entire frequency range (L-band) via two outputs (vertical and horizontal) combined with better immunity to terrestrial and 4G interference. Manufactured to the highest industry quality standards and engineered to meet stringent specifications, this LNB is an ideal solution for cost-effective reception from a satellite and distribution to multi-tuner home gateways or compatible Unicable II (DCSS) broadband multi switches.

Designed to the most stringent specifications and manufactured to the highest quality standards, this LNB is the ideal solution for receiving a satellite and distributing the signal to multi-tuner home gateways or compatible Unicable II (dCSS) broadband multi switches.

Features
- Local Oscillator: 10.40 GHz
- Low phase noise, DVB-S2 (HDTV) compliant
- Low-noise imaging
- Energy efficient
- High cross-polarization isolation
- High-Frequency Stability (PLL)
- Greater immunity to 4G interference

Technical Info
- Noise Figure: 0.7 dB typ. (1 dB max.)
- Gain Fluctuations: 6 dB max.
- Wideband Input Frequency Range: 10.70 ~ 12.75 GHz
- Output Frequency Range: 300~2350MHz
- LO Frequency: 10.4GHz ± 1MHz
- LO Temperature Drift (-30 ~ +60 °C) 10.4 GHz ± 1 MHz
- LO Phase Noise -80dBc/Hz @ 10KHz
- Conversion Gain 50dB ~ 60dB
- Gain Variation 6dB (max.)
- Gain Ripple (27MHz) ±0.5dB/27MHz
- Cross Polarization Isolation 25dB (min.)
- Image Rejection (8.05-10.1 GHz) 40dB (min.)
- 1dB Compression Point (at output) 0dBm (min.)
- Output VSWR 2.5:1 (max)
- In-Band Interference -60dBm (max.)
- Current Consumption 11-20V max. mA 100mA max.
- Output Impedance 75O
- Output Connector: F-Type

Dimension & Weight
- Dimensions (WxHxD): 106 x 65 x 65 mm
- Weight: 98g

Delivery
1x Inverto Pro wideband horizontal/vertical connection 40mm LNB