Quick Shipment
Dropshipping
Best-Service-Waranty
Order Hotline +49 2241 88 10 90

Neostar NTR-1630PA 16-Channel 4K UHD PoE NVR 3840x2160p H.265 VCA CMS HDMI 4K IP Recorder

-

Order now, ready to ship in 6 Workdays

  • VIDNTR03
  • 4260132681409
With the powerful 4K network video recorder Neostar NTR-1630PA, 16 network cameras up to 8MP... more
With the powerful 4K network video recorder Neostar NTR-1630PA, 16 network cameras up to 8MP resolution can be recorded and played back. The NVR has an integrated PoE switch so that network cameras can be connected directly to the device. The recognition and configuration of all Neostar network cameras takes place independently and automatically immediately after connection. The highest supported input resolution per network camera channel is 8 megapixels (3840 x 2160p).

The 16-channel UHD NVR allows you to record videos with a maximum resolution of 3860 x 2160p (8MP) on all 16 channels simultaneously. Playback is possible either in 1080p (8 channels) or in 8MP resolution (2 channels). The focus is also on good image quality with the lowest possible network bandwidth and economical use of storage capacity.

Features:
8 IP PoE camera channels
8.0MP (3840×2160p)
160Mbit / 160Mbit
video content analysis
multi stream
H.265 / H.264+ / H.264
Backup via USB, LAN
iOS and Android apps
HDMI 4K UHD / VGA
230VAC

8 megapixel 4K UHD network camera recording
The latest Neostar and Balter network cameras now support significantly higher resolutions than Full HD. For most network cameras, these are 5 megapixels (2592 x 1944p) and 8 megapixels (3840 x 2160p). In order to make the use of such high-resolution network cameras possible and to get all the advantages of both recording and playback, the NVR processor performance has been significantly increased. This performance increase enables simultaneous recording of 16 high-resolution (8MP) network cameras with a high frame rate.

Power over Ethernet (PoE)
The network video recorder has an integrated 16-channel PoE switch to which all Neostar network cameras can be connected and added to the system with just one click. External power supply and the laying of an additional power cable for each camera are no longer necessary. The PoE function thus brings advantages of easy installation of network video surveillance systems and saves considerable installation costs.

user interface
The internal user interface was designed in a way that allows even inexperienced users to navigate as easily as possible and to make changes to the settings themselves if necessary. Both the distribution of the most frequently used functions and the graphic design meet high industry standards. Support for alternative browsers such as Google Chrome, Opera and Safari, in addition to Internet Explorer, allows seamless operation of the system even without using ActiveX.

High definition playback
With the latest video surveillance technology and HDMI + VGA monitor interfaces, real-time playback is supported on a 4K UHD monitor via HDMI or a Full HD monitor via VGA. The recording and transmission over the network takes place in H.265 / H.264+ / H.264, so that much lower bandwidth and storage capacity are required for good video quality. Two 3.5" SATA hard drives with a total capacity of 16TB (each 8TB / HDD) can be installed in the network video recorder.

recording modes
In addition to continuous recording, there is motion detection or alarm activation, with pre- and post-alarm recording, and continuous recording with specially set parameters such as holiday planning and time determination. In this mode it is possible for each channel individually to define the activation of recording parameters after the event (motion detection, alarm activation). It can also adjust the frame rate, resolution, image quality and bit rate. These parameters can be set independently of the continuous recording setting. After an event occurs, for example motion detection or alarm activation, the recorder automatically switches to event recording mode, usually with higher recording parameters. The rest of the time, the recording is carried out continuously.

video content analysis
The basic Video Content Analysis (VCA) enables individual and independent adjustment of each single channel for intelligent image analysis. Recognition of the crossing of virtual lines and alarms when a previously defined area is crossed by one or more objects have been integrated. The diagnostic quality depends very much on the respective image quality and the prevailing environmental conditions.

network connectivity
The network video recorder has an RJ-45 LAN port that can be used to establish a network connection based on TCP / IP or PPPoE. Supported protocols and network services such as DHCP, SNMP, FTP, SMTP, email, NTP, DNS, DDNS, UPnP are also available. Connectivity with the recorder is provided by connecting to popular Web browsers (IE, Google Chrome, Opera, Safari), the free Neostar CMS client software (PC) or Neostar or NeostarHD apps for iOS (iPhone, iPad) or Android.

Central monitoring software
Neostar CMS client software enables the viewing, control and configuration of Neostar branded recorders and cameras over the network. The application allows to manage up to 256 devices on up to 4 monitors. A maximum of 64 cameras can be displayed on one screen, with the recommendation depending on the size of the monitor being 16 to 24 cameras per screen. In addition to viewing and configuration, the CMS enables remote playback, alarm message display, bi-directional audio playback, and the use of multi-level maps for viewing individual cameras.

Neostar and NeostarHD iOS and Android apps
Neostar Apps are mobile applications for smartphones and tablets that work on the basis of the Android and iOS operating systems. Remote-controlled display of live images and playback of archive recordings is made possible by the apps. Not only analog, HD-SDI and network video recorders are shown, but also all Neostar IP cameras.

Scope of delivery:
NEOSTAR 16-channel 4K UHD PoE NVR, 3840x2160p, 160Mbit, H.265 / H.264+, VCA, CMS, HDMI 4K, 230V AC - NTR-1630PA
Cold device cable 230V
usb mouse
Software CD
Quick Start Guide (English)
Related links to "Neostar NTR-1630PA 16-Channel 4K UHD PoE NVR 3840x2160p H.265 VCA CMS HDMI 4K IP Recorder"
Read, write and discuss reviews... more
Customer evaluation for "Neostar NTR-1630PA 16-Channel 4K UHD PoE NVR 3840x2160p H.265 VCA CMS HDMI 4K IP Recorder"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Last seen