Anthell Electronics AE-601Z2 Fingerprint Access Controller

Tired of standing in front of locked doors without a key? Then simply open your door with your fingerprint! You could forget your key or number combination, but not your finger!

The AE-601Z2 is a complex but easy-to-use biometric access controller. Thanks to its 2-zone function, you can open your front door with your finger (A) and your garage door with your finger (B), for example. Thanks to the finger scanner technology, it leaves nothing to be desired.

Features
- Protection Class IP65
- Flush Mounting
- Status LED Display
- Solid Metal Housing
- 900 Fingerprint Users
- Two Potential-Free Relay Outputs
- Switching time adjustable from 01-99 seconds
- Programming via IR remote control
- Users remain stored in the event of a power failure (EPROM)

With the technically sophisticated fingerprint scanner (500DPI resolution) you can easily record up to 900 fingerprint users. Programming is done using the included remote control.

Thanks to the solid and splash-proof stainless steel front (2mm), the AE-601Z2 can be used indoors or outdoors! No additional weather protection roof is required!

In terms of material, the product is made of brushed, 2 mm thick stainless steel, the product dimensions are 100x110x60 mm and its own weight is approx. 350 g. This device is only suitable for flush-mounted installation.

The SRM module and the top-hat rail power pack are installed indoors (e.g. sub-distribution board). The access controller and the electric door opener/motor lock are connected to the SRM module. Even the slightest movement of the access controller activates the SRM module. Activation de-energizes the outdoor station and disconnects the connection between the outdoor station and the door opener / motorized lock/gate operator, making manipulation from the outside impossible. This makes the outdoor station the perfect security device for your home and the most important part of your security system.

Technical Info
- Mounting options: Flush mount
- Material options: stainless steel + plastic
- Finish: Brushed
- User capacity (number of fingers): 900 fingerprints
- Operating temperature: -20°C to +60°C
- Operating voltage: 12V/DC - 90mA (standby)/120mA (operation)
- Fingerprint scanner (resolution): 500DPI
- Reading Speed: <1S
- FAR: < 0.01%
- FRR: < 0.1%
- Relay: 2 potential-free relays (NO, NC, COM)
- Adjustable opening time: 01-99 seconds
- Relay switching load: Max. 2A
- Dimensions (fingerprint access controller with flush-mounted box): 110 x 100 x 38.5mm
- Dimensions (power supply): 90 x 60 x 20mm

Delivery
1x Anthell Electronics Fingerprint Access Controller, AE-601Z2
1x Allen Key, Screw and Cable Set
1x Power Supply (MEAN WELL HDR-15-12)
1x Security Module (SRM)
1x Remote Control
1x Flush-Mounted Box